Robomow’s Base Station must be placed along the Perimeter Wire, where the wire “loop” starts and ends. Other things to keep in mind when placing the Base Station:
- Place it on relatively level ground. Do not place it on a slope.
- Do not place it within 3 meters from a corner (1m for RX models).
- Place it close enough to a 230V/120V power outlet. Distance should be within 65ft/20 m for RS models; within 50ft/15 m for RC models; within 32ft/10 m for RX models.
- Place the Base Station away from sprinkler heads.
- Put it in a shady spot. This will extend the battery lifetime.
- Make sure it is invisible from the street.