If the Separated Zone is not connected to the Main Zone and Robomow cannot drive between these zones, then you have to define and install it as a Separated Zone. If the Separated Zone is small enough so Robomow can cover all the area in a single operation, then choose one of the following installations:
- If possible, the separated area may be connected to the main area’s Perimeter Wire.
- If that option is not possible, you can use a Perimeter Switch (available as an accessory for RS/RC models only). It may have to have its own separate Perimeter Wire.
- If the Separated Zone cannot be mowed in single operation, an additional Base Station (optional accessory) should be installed in the separated area.