For RC Models
Blade Cutting Range: 0.6-2.4 inches (15-60mm)
CAUTION! ALWAYS TURN THE SAFETY SWITCH OFF BEFORE ADJUSTING THE CUTTING HEIGHT!

To adjust the cutting height of the blade, do the following:
- Lift the front side of the mower
- Turn the knob while pushing it down
- To lower the cutting height, turn counter-clockwise
- The cutting height is displayed at the side of the mower

For RS Models
Blade Cutting Range: 0.8-3 inches (20-80mm)
CAUTION! ALWAYS TURN THE SAFETY SWITCH OFF BEFORE ADJUSTING THE CUTTING HEIGHT!

To adjust the cutting height of the blade, do the following:
- Lift the Door panel at the top of the mower
- Turn the knob (A) while pushing it down
- To raise the cutting height, turn counter-clockwise
- To lower the cutting height, turn clockwise
- The cutting height (B) is displayed to the left of the knob (A)
